For those who've joined the scout while still in school will remember the mandatory curriculum, which makes rope. There are various kind, ranging from bond beam, bond canggah, ties three legs, and so forth. Still remember how to make a variety of the rope? Likely to have forgotten that rarely used for years. Well, in order Scouts Day August 14, it's worth remembering and re-learn the various types of rope.
1. Cross ties (Square Lashing)
 |
| SMPK-bm-lawang.blogspot.com |
1. Cross ties (Square Lashing)
Cross ties in English is known as the square lashing is a bond that serves to link the two wooden sticks or perpendicular position. Its use as a framework to make dragbar (stretcher), etc.. To make the cross ties, here are the steps:
- Make a knot at the base of one of the sticks. Belitkan rest of the short rope to a long rope.
- Belitkan rope in such a way (see figure points "b" and "c") on both sticks. Top, second rope loops Line up next to the second winding, so the next).
- After about four convolution (or as needed), change the direction of rotation of the rope and wrap in between two sticks (see picture "c" and "d")
- End ties with a knot at the base of the stick is different from that at the base of the first knotted ties (see figure "e" and "f").
2. Bond Cross (Cross Lashing)
Crosslinking in English is known as cross lashing. The usefulness of this bond is to link the two pieces of sticks or wooden cross psosisinya. Generally the angle formed by two sticks are not perpendicular or 90 degrees. If the perpendicular bond beam use. To make crosslinking follow these steps:
- Make a knot at the crossroads of two sticks mooring.
- Belitkan rope between a side angle as much as four times (or more as needed).
- Replace belitkan rope between the top-down angle as much as four times (or more as needed).
- End crosslinking by making a knot at the base of one of the wooden or cane.
3. Ties Canggah
Canggah bonding is used to connect two pieces of sticks in a straight line. The use of bond canggah like to make a flag pole with rod connection. There are several versions of canggah bond, but is more often used is as following steps:
- Draw a figure in between two sticks that are connected.
- Long rope wrapped around the second stick. Wrap up the end of the linkage.
- Enter the ropes into a figure created in the first step above (fig. 2)
- Pull the end of the rope so that figure into the coil (figure 2)
- Thread the rope below the base node to node.
4. Three Feet bond (Tripod Lashing)
Ties three legs are used to combine the three pieces of wood or sticks with each position to form a straight or three feet. To make the bond foot three follow these steps:
- Arrange the sticks in parallel.
- Make a knot at the base of the rod outer one.
- Belitkan webbing straps forming the three sticks (fig. 3 -4)
- Belitkan rope cross tie webbing between the first and second rod (fig. 5-6)
- Do the same between the second and third rod (fig. 7-8)
- Make a knot woven in the outer sticks (different sticks woven with the first node) (fig. 9-12)
-
Source
Posting Komentar